DXS-1210 Series Smart Managed Switch CLI Reference Guide
288
Switch# configure terminal
Switch(config)# ssl-service-policy ssl-server ciphersuite rsa-null-md5
Switch(config)#
37-3 show ssl-global-setting
This command is used to to display the SSL global settings.
show ssl-global-setting
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
To display the SSL status.
Example
This command is used to to display the SSL global settings.
Switch# show ssl-global-setting
ssl server state: Disable
ssl service policy name:
Switch#
To Next Page
Loading...
