D-Link DXS-1210-16TC - Page 389

DXS-1210 Series Smart Managed Switch CLI Reference Guide
386
(3) ifOperStatu
linkDown A notification is generated when port linkdown.
Binding objects:
(1) ifIndex
(2) if AdminStatus
(3) ifOperStatu
1.3.6.1.6.3.1.
1.5.3
Port Security
Trap Name Description OID
portSecurityVioAction When the port security trap is enabled, new MAC
addresses that violate the pre-defined port security
configuration will trigger trap messages to be sent
out.
Binding objects:
(1) portSecurityPort
(2) portSecurityVioCount
1.3.6.1.4.1.17
1.10.139.1.1.
8.1.2.1.1.4
RMON
Trap Name Description OID
risingAlarm The SNMP trap that is generated when an alarm
entry crosses its rising threshold and generates an
event that is configured for sending SNMP traps.
Binding objects:
(1)alarmIndex
(2)eventDescription
(3)alarmVariable
(4)alarmSampleType
(5) alarmValue
(6) alarmRisingThreshold
1.3.6.1.2.1.16
.0.1
fallingAlarm The SNMP trap that is generated when an alarm
entry crosses its falling threshold and generates an
event that is configured for sending SNMP traps.
Binding objects:
(1)alarmIndex
(2)eventDescription
(3) alarmVariable
(4)alarmSampleType
(5)alarmValue
(6) alarmFallingThreshold
1.3.6.1.2.1.16
.0.2
Start
Trap Name Description OID
coldStart A coldStart trap signifies that the SNMPv2 entity,
acting in an agent role, is reinitializing itself and that
itsconfiguration may have been altered.
1.3.6.1.6.3.1.
1.5.1
warmStart A warmStart trap signifies that the SNMPv2 entity,
acting in an agent role, is reinitializing itself such that
itsconfiguration is unaltered.
1.3.6.1.6.3.1.
1.5.2