D-Link Securicam Network DCS-2000 - Page 40

40
Streaming Screen under “Advanced Network”
Control channel port - Can be set to a port other than the default port
5001. A corresponding port must be opened on
your firewall.
Audio channel port - Can be set to a port other than the default port
5002. A corresponding port must be opened on
your firewall.
Video channel port - Can be set to a port other than the default port
5003. A corresponding port must be opened on
your firewall.
Improve audio quality
in low bandwidth
environment -
In a low bandwidth network environment you can
check this option to improve audio quality by
sacrificing some real-time synchronization
.
Using the DCS-2000 with an Internet browser
(continued)
Click Apply to make
changes effective