42
Enable DDNS -
Click to enable the DDNS function.
Provider- Select your Dynamic DNS provider from the pull
down menu.
Host name-
Enter the host name of the DDNS server.
Username/E-mail-
Password/Key-
Enter your password or key used to connect to
the DDNS server.
Using the DCS-2000 with an Internet browser
(continued)
Configuration > Advanced > DDNS & UPnP (Continued)
Enter your username or e-mail used to connect to
the DDNS server.
UPnP
UPnP is short for Universal Plug and Play, which is a networking architecture
that provides compatibility among networking equipment, software, and
peripherals. The DCS-2000 is a UPnP enabled internet camera. If your operating
system is UPnP enabled, the device will be easier to configure. If you do not
want to use the UPnP functionality, it can be disabled by unselecting the Enable
UPnP check box.
Click Apply to make
changes effective
To Next Page
Loading...
