44
Configuration > Advanced > Video (Continued)
Color -
Size -
Maximum frame rate-
Video quality control-
Flip - Vertically rotate the video.
Three options exist for the sizes of the video display.
You can select between 176x120/176x144,
352x240/352x288, or 704x480/401x576. The first
value represents the PAL format of video and the
second value represents the NTSC format. In
704x480/401x576 mode, the frame rate will be
reduced to 10fps and increased to 30fps
automatically when it is switched back to a lower
image size.
Power line frequency
(for fluorescent light)
Select the option for color or monochrome video
display.
Fluorescent lights may intermittently cause a
flashing image depending on the AC power line
frequency. Change the frequency setting to
eliminate a flashing image when the light source is
fluorescent light.
Limits the maximum refresh frame rate. The frame
rate is used with the Video quality control setting
(below) to optimize bandwidth utilization and video
quality.
To fix the bandwidth utilization regardless of the
video quality, choose Fix bit rate and select the
desired bandwidth. The video quality may be reduced
in order to send maximum frames with limited
bandwidth, especially when images change
drastically. For higher video detail regardless of the
bandwidth selection, select Fix quality and select
a quality level. This setting will utilize more bandwidth
to send the maximum frames when images change
drastically.
Using the DCS-2000 with an Internet browser
(continued)
To Next Page
Loading...
