REMOVING THE STRAW CUTTER
BLADES
1. The ear side straw cutting blade
Open the threshing compart-
ment cover.
Loosen the bolts, nuts and
straw cutting blade.
2. The plant side straw cutting
blade.
Remove the bolts from the
straw cutting blade holder 2.
Detach the straw cutting blade
from the upper dust plate.
DISMANTLING METHOD
1. Open the threshing compart
-
ment and put down prop.
2. Hold grain sieve and push or
pull to direction A or B.
3. Hold the reinforcement to take
out the grain sieve from direc-
tion C.
THRESHING SCREEN DIS-
MANTLING METHOD
417O902A
(1) Grain Sieve
(2) Reinforcement
(A) Push upward
(B) Pull upward
(C) Cling
INSTALLATION
1. Hold grain sieve and put down
to direction A or B.
2. Pull back to direction C after it
enters the guide rail; cling and
feed into chain platform
417O903A
(1) Grain Sieve
(2) Reinforcement
(3) Feed into chain platform
(A) Push upward
(B) Pull upward; cling
(C) Cling
To Next Page
Loading...
