HOW TO SWITCH
1. Open the cutter conveyer cover
rst and leave it open.
(1) Cutter Conveyer Cover
(A) Open
SWITCHING BETWEEN THE
CUTTER AND DROPPER
417O746A
2. Open the upper cover 2.
(1) Upper Cover 2
417O747A
1. Place the lever to the position of
DROPPER.
(1) Straw Discharge Selection Lever
(A) Cutter (B) Dropper
AT DROPPER WORKING
417O749A
AT CUTTER WORKING
1. Place the change lever to the
position of "cutter" Ensure that
the change lever is placed to
the position of "dropper" after
the harvesting.
To Next Page
Loading...
