EasyManua.ls Logo

Daher TBM 900 - Airspeed Indicating System Failure

Default Icon
996 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Pilot's Operating Handbook
Section 3
Emergency procedures
EASA Approved
Edition 0 - October 31, 2013
Rev. 6
Page 3.12.13
Airspeed indicating system failure
Symptoms : erroneous indication in flight.
1 - PITOT L HTR switch Check ON. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 - PITOT R & STALL HTR switch Check ON. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If symptoms persist :
3 - ALTERNATE STATIC SOURCE selector Pull thoroughly. . . . . . . . . . .
4 - Use standby instrument only.
If symptoms persist, as well as on the electronic standby instrument on the L.H
instrument panel :
5 - Perform a precautionary approach maintaining an adequate
airspeed.
End of procedure.
PIM - DO NOT USE FOR FLIGHT OPERATIONS

Table of Contents