Pilot's Operating Handbook
Supplement 66
GARMIN G1000 NXi retrofit
Edition 1 - November 9, 2017
Rev. 0
Page 9.66.10
or
XPDR2 FAILXPDR1 FAIL
Indicates transponder # 1 [or transponder # 2] is inoperative.
► Fly the airplane ◄
If transponder # 2 [or transponder # 1] is available :
1 - Set transponder # 2 [or transponder # 1] as active.
2 - Continue flight.
3 - Inform maintenance department.
End of procedure ■
If transponder # 2 [or transponder # 1] is unavailable
4 - Inform Air Traffic Control of the loss of the second XPDR.
5 - Leave controlled airspace.
6 - Continue flight.
7 - Inform maintenance department.
End of procedure.
>> Airplane equipped with GTS820 Traffic advisory system (MOD70-0258-00)
TCAS FAIL
Indicates that Traffic advisory system is inoperative.
● NOTE ●
No active traffic available, but ADSB-IN traffic may still be displayed.
●
► Fly the airplane ◄
1 - Inform maintenance department.
End of procedure.
To Next Page
