Pilot's Operating Handbook
Section 3
Emergency procedures
EASA Approved
Edition 0 - October 31, 2013
Rev. 4
Page 3.1.2
Both indicators/buttons are located on the upper part of the L.H. instrument panel.
When either one lights up, press it once to reactivate. It will go out and is ready to
signal in the event of another failure. On the CAS display, the corresponding failure
message remains ON as long as the failed condition exists.
The actions associated to the red warning or amber caution messages are
described in this Section of the POH.
To Next Page
Loading...
