Dahua Technology DH-XVR Series - Calling Auto Pan; Using aux Button; Calling OSD Menu

User's Manual
104
Step 3 The PTZ camera performs scanning according to the configured borders.
Step 4 Click again to stop auto scanning.
5.4.4.5 Calling Auto Pan
Procedure
Step 1 On the expanded PTZ control panel, click to start moving in horizontal direction.
Step 2 Click again to stop moving.
5.4.4.6 Using AUX Button
On the expanded PTZ control panel, click .
●
In the
Shortcut Aux
list, select the option that corresponds to the applied protocol.
●
In the
Aux No.
box, enter the number that corresponds to the AUX switch on the decoder.
Figure 5-60 Auxiliary
5.4.5 Calling OSD Menu
For the coaxial camera, you can call the OSD menu through the expanded PTZ control panel.
Procedure
Step 1 On the expanded PTZ control panel, click .