User's Manual
57
Figure 5-17 Startup wizard
●
If you select the
Auto-check for updates
checkbox, the system will notify you automatically
when updates are available.
●
After the auto-check function is enabled, to notify you to update timely, the system will collect
the information such as IP address, device name, firmware version, and device serial number. The
collected information is only used to verify the legality of the Device and push upgrade notices.
●
If you clear the
Auto-check for updates
checkbox, the system will not perform automatic
checks.
5.1.4.2 Configuring General Settings
You can configure the general settings for the Device such as Device name, language, and settings
for instant playback.
You can also configure general settings by selecting
Main Menu > SYSTEM > General > Basic
.
Procedure
Step 1 On the
Startup Wizard
page, click
Next
.
To Next Page
Loading...
Need help?
General
