User's Manual
244
Step 2 Configure the parameters settings.
Table 5-52 IoT search parameters
Parameter Description
Access Point Indicates the channel that the camera is connected to.
Display Type
In the
Display Type
list, select
List
or
Diagram
.
Type
Select the information type that you want to search. You can select
Humidity
or
Temperature
.
Status
Select the information state that you want to search.
This option is available when you select
List
in the
Display Type
list.
Start Time
Enter the start time and end time for the information that you want to
search.
End Time
Step 3 Click
Search
.
The system starts search according to your parameters settings. After searching is finished,
the result displays.
Click
Goto
to switch result pages.
Figure 5-208 List
To Next Page
Loading...
Need help?
General
