User's Manual
68
Figure 5-26 Record
Step 2 Configure the record settings parameters.
Table 5-9 Record settings
Parameter Description
Channel In the
Channel
list, select a channel to record the video.
Pre-record
In the
Pre-record
list, enter the amount of time that you want
to start the recording in advance.
Redundancy
If there are several HDDs installed to the Device, you can set
one of the HDDs as the redundant HDD to save the recorded
files into different HDDs. In case one of the HDDs is damaged,
you can find the backup in the other HDD.
●
Select
Main Menu
>
STORAGE > Disk Manager
, and then
set a HDD as redundant HDD.
●
Select
Main Menu
>
STORAGE
>
Schedule
>
Record
, and
then select the
Redundancy
checkbox.
◇
If the selected channel is not recording, the redundancy
function takes effect next time you record no matter
you select the checkbox or not.
◇
If the selected channel is recording, the current
recorded files will be packed, and then start recording
according to the new schedule.
●
This function is available on select models.
●
The redundant HDD only back up the recorded videos but
not snapshots.
Event type
Select the checkbox of the event type which includes
General
,
Motion
(motion detect, video loss, tempering, diagnosis),
Alarm
(IoT alarms, local alarms, alarms from alarm box, IPC
external alarms, IPC Offline alarms),
M&A
,
Intelligent
(IVS
events, face detection), and
POS
.