User’s Manual
13
Optional settings Figure 3-4
Table 3-6 Parameter description of optional settings
Set router name. The name length can be up to 39 characters.
Enter host name and domain name which are provided by your ISP.
Generally you can leave them blank.
MTU (Maximum Transmission Unit) specifies the maximum packet value
allowed in Internet transmission.
Auto: 1500 by default.
Manual: 576–1492 in PPPoE mode, 576–16320 in other modes. Value
among 1200–1500 is recommended.
1492 is recommended.
If the Router is required to select the best MTU for the Internet, select
Auto mode.
Supports the following modes: Auto, 100M and 10M.
Click Save to save the configuration. Step 4
Click Apply Settings to apply the configuration. Step 5
(Optional) Click Cancel Changes to cancel the configuration. Step 6
3.3.1.2 Network Setup
You can configure router IP, WAN port, DHCP, time settings and adjust time.
Router IP
Log in to the web interface of the Router. Step 1
In the left navigation menu, select Setup > Basic Setup. Step 2
In Router IP section, configure router IP. Step 3
To Next Page
Loading...