Dahua DHI-NVR5208-8P-4KS2 User Manual

115
③Connect to the HDD data cable to the main board
and the HDD port respectively. Loosen the power cable
of the chassis and connect another end of the power
cable to the HDD port.
④After connect the cable, put the front cover
back to the device and then fix screws of the rear
panel.
3.3.7 NVR78-RH Series
①Turn the key into the hole in the front
panel.
②Open the front panel.
③ Put the HDD to the slot and adjust the
handle to secure it.
④Put the front panel back and use the key to fix
firmly.
HDD Handle Installation

Dahua DHI-NVR5208-8P-4KS2 Specifications

General

Model	DHI-NVR5208-8P-4KS2
PoE Ports	8
Multi-screen Display	Yes
OSD	Yes
Video Detection and Alarm	Yes
Relay Output	1
Smart Phone	Yes
USB	2 x USB 2.0
Video Input	8
Storage Capacity	Up to 10TB per HDD
HDD Bays	2
Network Interface	1 RJ-45 port (10/100/1000 Mbps)
Video Output	HDMI, VGA
Max. User Access	128
Power Supply	100-240V AC, 50/60Hz
Power Consumption	≤ 10W
Operating Temperature	-10°C to +55°C (14°F to 131°F)
Operating Humidity	10% to 90%