208
Figure 4-95
4.13.2 IVS (Optional)
Please make sure you are connecting to the smart network camera, otherwise you can not
use IVS function!
From main menu->Setting->Event, you can go to the IVS interface. It includes four interfaces:
Tripwire/intrusion/object/scene.
4.13.2.1 Tripwire （Optional）
Please make sure you are connecting to the smart network camera, otherwise you can not use
IVS function!
System generates an alarm once there is any object crossing the tripwire in the specified direction.
From main menu->Setting->Event->IVS->Tripwire, the interface is shown as below. See Figure 4-96.
To Next Page
Loading...
Need help?
General
