298
The default value is 37778. You can input the actual port
number if necessary.
The default value is 80. You can input the actual port number if
necessary.
The default value is 443. You can input the actual port number if
necessary.
The default value is 554.
5.8.2.3 WIFI AP
Please note this function is for some series only.
The WIFI AP interface is shown as in Figure 5-29. Here you can set WIFI hotspot, so that the network
camera can use the hotspot to connect to the network.
Figure 5-29
Please refer to the following sheet for detailed information.
It is to set SSID name. You can use this name to search the
device.
It is to set SSID password. You can use this password to
connect to the network.
Select authentication from the dropdown list.
Select encryption type from the dropdown list.
Input start IP and end IP. The NVR can allocate the IP address
in the range you specified here.
To Next Page
Loading...
Need help?
General
