152
device to the bottom pane of the interface. System supports batch add function.
Click Manual Add button, you can add a device directly. Here you can set TCP/UPD/auto connection
mode. The default setup is TCP. See Figure 4-25.
Important
Please note the manual add function is for Private, Panasonic, Sony, Dynacolor, Samsung, AXIS,
SANYO, Pelco, Arecont, ONVIF, LG, Watchnet, Canon, PSIA, IVC, XUNMEI, and Custom. When the
type is the custom, you can just input URL address, user name and password connect to the network
camera without considering network camera manufacture. Please contact your network camera
manufacturer for the URL address.
At the bottom of the Figure 4-24, there is remaining bandwidth and total bandwidth information for
your reference when you are adding network camera(s).
Figure 4-25
4.6.2 Short-Cut Menu
In the preview interface, for the channel of no IPC connection, you can click the icon “+” in the centre of
the interface to quickly go to the Remote Device interface. See Figure 4-26.
To Next Page
Loading...
Need help?
General
