229
Figure 4-123
4.14.1.4 WIFI
The WIFI interface is shown as below. See Figure 4-124.
Enable: Check the box here to enable WIFI function.
Refresh: You can click it to search the hotspot list again. It can automatically add the information
such as the password if you have set it before.
Disconnect: Here you can click it to turn off the connection.
Connect: Here you can click it to connect to the hotspot. System needs to turn off current connection
and then connect to a new hotspot if there is connection of you selected one.
To Next Page
Loading...
Need help?
General
