Dahua ITC215-PW4I-IRLZF27135

WEB Client 49
Extra Device Status
5.4.1.6.2 Spotlight
In this section, you can configure light array and output mode of spotlight.
Select Setting > ITC > Extra Device > Spotlight.
The Spotlight interface is displayed, see Figure 5-34.
Spotlight
Select Configure parameters according to actual requirement. Please refer to Table
5-18 for more details.
Table 5-18 Spotlight parameters description
Parameter
Note
Light Array
There are totally 3 groups optional.
Output
Mode
Select the output mode of spotlight.

Off: Spotlight is always off.

Always: Spotlight is always on.

Auto: Automatically enable spotlight according to time or brightness.
Brightness
Set the brightness value of spotlight. It is 40 by default.