Dahua NVR608-32-4KS2 - Preview Display Effect Setup; Display

86
Figure 3-64
Step 3 Click Apply to save current channel sequence.
After you change the channel sequence, click Cancel button or right click mouse, device pops
up the dialogue box. See Figure 3-65.
 Click OK to save current settings.
 Click Cancel to exit without saving the settings.
Figure 3-65
3.6.6 Preview Display Effect Setup
3.6.6.1 Display
From Main Menu->Setting->System->Display, you can go to the following interface. See Figure 3-66.
Here you can set menu and video preview effect. All you operation here does not affect the record file and
playback effect.
Now you can set corresponding information.
 Time display: You can select to display time or not when system is playback.