Dahua NVR608-32-4KS2 - Loitering Detection

147
 Preset: Select a preset you want to use IVS.
 Name: Input customized rule name.
 Duration: System can generate an alarm once the object in the zone is missing for the specified
period.
 Target filter: Click
, you can set filter object size. Each rule can set two sizes (min size/max size).
Once the object is smaller than the min size or larger than the max size, there is no alarm. Please
make sure the max size is larger than the min size.
Now you can draw a rule. Left click mouse to draw a zone, until you draw a rectangle, you can right click
mouse.
Tips
Click
to delete the corresponding rule.
Click
, you can refer to the chapter 3.10.3.1 to set other parameters.
Click Apply to complete the setup.
3.10.3.5 Loitering Detection
System can generate an alarm once the object is staying in the specified zone longer than the threshold.
From main menu->Setting->Event->IVS, select the type as loitering, the object interface is shown as
below. See Figure 3-135.
 System supports customized area shape and amount.
 Support duration setup.
 Support objects filter function.
Figure 3-135