350
Figure 4-135
Please refer to the following sheet for detailed information.
Parameter Function
Enable tour
Check the box here to enable tour function.
Interval
Here is for you to adjust transparency. The value ranges from 5 to
120s. The default setup is 5s.
Split
Here you can set window mode and channel group. System can
support 1/4/8/9/16/25/36-
window according to device channel
amount.
Motion
tour/Alarm
tour
Here you can set motion detect tour/alarm tour window mode.
System supports 1/8-window now.
4.6.6.2.3 Custom Split
From main menu>Setup>System>Display>Custom split, the interface is shown as in Figure 4-136. Here
you can set customized split mode.
To Next Page
Loading...
