Dahua NVR608-32-4KS2 - Ptz

351
Figure 4-136
Click
and then click to select basic mode
In regular mode, drag the mouse in the preview frame, you can merge several small windows to one
window so that you can get you desired split mode.
After the setup, the selected window has the red frame.
Select the merging window, the frame is red; you can click
to cancel the merge to restore regular
mode.
Click OK to exit.
4.6.6.3 PTZ
The PTZ interface is shown as in Figure 4-137 (local type) and Figure 4-138 (remote type).
Before setup, please check the following connections are right:
 PTZ and decoder connection is right. Decoder address setup is right.
 Decoder A (B) line connects with NVR A (B) line.
Click Save button after you complete setup, you can go back to the monitor interface to control speed
dome.
Figure 4-137