321
OSD overlay: Check the box here; you can view the people amount on the surveillance video.
Direction: It is to set people flow direction. It includes entry/exit.
Entry No.: It is to set people entry amount. System can generate an alarm once the amount has
exceeded the threshold.
Exit No.: It is to set people entry amount. System can generate an alarm once the amount has
exceeded the threshold.
Stranded No.: It is to set people staying amount in the zone. System can generate an alarm once the
amount has exceeded the threshold.
For detailed setups, please refer to chapter 4.6.4.1.1 motion detect for detailed information.
Figure 4-93
4.6.4.6 Heat Map
It is to detect the object activity level in the scene during the specified period.
From main menu>Setup>Event>Heat Map, you can see an interface shown as in Figure 4-94.
For detailed setups, please refer to chapter 4.6.4.1.1 motion detect for detailed information.
To Next Page
Loading...
