Dahua NVR608-32-4KS2 - Video Overlay; Path

273
Image size It is the same with the resolution of the main stream.
Quality
It is to set the image quality. There are six levels.
Interval
It is to set snapshot frequency. The value ranges from 1s to 7s.
Or you can set customized value. The max setup is
3600s/picture.
4.6.1.3.3 Video Overlay
From main window>Setup>Camera>Encode>Overlay, the video overlay interface is shown as in Figure
4-35.
Figure 4-35
Please refer to the following sheet for detailed information.
Parameter Function
Cover-area
Check Preview or Monitor first.
Click Setup button, you can privacy mask the specified video in
the preview or monitor video.
System max supports 4 privacy mask zones.
Time Title
You can enable this function so that system overlays time
information in video window.
You can use the mouse to drag the time title position.
You can view time title
on the live video of the WEB or the
playback video.
Channel Title
You can enable this function so that system overlays channel
information in video window.
You can use the mouse to drag the channel title position.
You can view channel title on the live video of the WEB or the
playback video.
4.6.1.3.4 Path
From main window>Setup>Camera>Encode>Path, the storage path interface is shown as in Figure 4-36.
Here you can set snap image saved path (
in the preview interface) and the record storage path
(
in the preview interface).The default setup is C:\PictureDownload and C:\RecordDownload.