Dahua NVR608-32-4KS2 - Audio Detect

322
Figure 4-94
4.6.4.7 Audio Detect
System can generate an alarm once it detect the audio input is abnormal or audio volume changes.
From main menu>Setup>Event>Audio detect, you can see an interface shown as in Figure 4-95.
 Input abnormal: Check the box here, system can generate an alarm once the audio input is
abnormal.
 Intensity change: Check the box here, system can generate an alarm once the audio volume
becomes strong.
 Sensitivity: It refers to the audio recognition sensitivity. The higher the value is, the higher the
sensitivity is.
 Threshold: It is to set intensity change threshold. The smaller the value is, the higher the sensitivity
is.
For detailed setups, please refer to chapter 4.6.4.1.1 motion detect for detailed information.