307
For detailed setups, please refer to chapter 4.6.4.1.1 motion detect for detailed information.
4.6.4.1.5 Video analytics
From main window>Setup>Event>Video detect>Video diagnosis, the video diagnosis interface is shown
as in Figure 4-71.
Figure 4-71
Click Set button, the interface is shown as below. See Figure 4-72.
System can generate an alarm once there is stripe, noise, or video is color cast, out of focus or over
exposure.
Figure 4-72
For detailed setups, please refer to chapter 4.6.4.1.1 motion detect for detailed information.
4.6.4.1.6 Video Quality Analytics
When video image appears the phenomenon such as video fuzzy, overexposure and image color cast,
the system triggers the alarm linkage actions.
Step 1 Select Setup > Event > Video Detection > Video Quality Analytics
The Video Quality Analytics interface is displayed. See Figure 4-73
To Next Page
Loading...
