174
3.10.12 Alarm output
From Main menu->Setting->Event->Alarm output, you can see an interface shown as in Figure 3-166.
Here is for you to set proper alarm output (Auto/manual/stop). Connect the alarm device to the system
alarm output port, and set the mode as auto, system can trigger the corresponding operations when an
alarm occurs.
Auto: Once an alarm event occurs, system can generate an alarm.
Manual: Alarm device is always on the alarming mode.
Stop: Disable alarm output function.
Click OK button of the alarm reset, you can clear all alarm output status.
Figure 3-166
Please highlight icon to select the corresponding alarm output.
After all the setups, please click OK button.
3.10.13 Temperature Alarm
When device with temp measurement function is accessed on the front end, the system supports temp
alarm settings.
Note
Some series do not support the temp alarm function. The actual product shall goven.
To Next Page
Loading...
