Dahua NVR608-32-4KS2 - Default; Upgrade; File Upgrade; Cloud Upgrade

363
Parameter Function
Import
It is to import the local setup files to the system.
Export
It is to export the corresponding WEB setup to your local PC.
4.6.6.9 Default
The default setup interface is shown as in Figure 4-156.
Here you can select Network/Event/Storage/Setting/Camera. Or you can check the All box to select all
items.
Figure 4-156
4.6.6.10 Upgrade
CAUTION
 During the upgrade process, do not unplug the power cable, network cable, or shutdown the device.
 Improper upgrade program may result in device malfunction!
There are two upgrade modes: file upgrade and online upgrade.
4.6.6.10.1 File Upgrade
The upgrade interface is shown as in Figure 4-157.
Please select the upgrade file and then click the update button to begin update. Please note the file name
shall be as *.bin.
Figure 4-157
4.6.6.10.2 Cloud Upgrade
When the NVR is online, you can use the cloud upgrade to update the firmware.
Note
Make sure the NVR has properly connected to the network.