347
to the login interface.
Navigation
bar
Check the
box here, system displays the navigation bar on the
interface.
Sync
You can input an interval here to synchronize the NVR time and IPC
time.
4.6.6.1.2 Date and time
From main menu>Setup>System>General>Date and time, the date and time interface is shown as in
Figure 4-132
Figure 4-132
Please refer to the following sheet for detailed information.
Parameter Function
Date format
Here you can select date format from the dropdown list.
Time
Format
There are two options: 24-H and 12-H.
Time zone
The time zone of the device.
System
time
It is to set system time. It becomes valid after you set.
Caution
System time is very important! Do not change unless there is a must!
Sync PC
You can click this button to save the system time as your PC current
time.
DST
Here you can set day night save time begin time and end time. You
can set according to the date format or according to the week format.
To Next Page
Loading...
