Dahua NVR608-32-4KS2 - Face Detect; People Counting

320
Figure 4-91
4.6.4.4 Face Detect
When camera detects human face, system can generate an alarm.
From main menu>Setup>Event>Face detect, the interface is shown as in Figure 4-92.
 Face ROI(Region of Interest): Check the box here, system can enhance the human face display
pane.
 Sensitivity: System supports 6 levels. The sixth level has the highest sensitivity.
For detailed setups, please refer to chapter 4.6.4.1.1.
Figure 4-92
4.6.4.5 People Counting
System can calculate the entry/exit people amount in the specified zone. It can generate an alarm when
the amount has exceeded the threshold.
From main menu>Setup>Event>People counting, you can see an interface shown as in Figure 4-93.
 Channel: Please select a channel from the dropdown list. Check the box to enable people counting
function.