Dahua NVR608-32-4KS2 - Call PTZ Function; Call Preset; Call Pattern; Call Tour

103
Figure 3-90
3.7.4 Call PTZ Function
3.7.4.1 Call Preset
In Figure 3-85, input preset value and then click
to call a preset. Click again to stop call.
3.7.4.2 Call Pattern
In Figure 3-85, input pattern value and then click to call a pattern. Click again to stop
call.
3.7.4.3 Call Tour
In Figure 3-85, input tour value and then click
to call a tour. Click again to stop call.
3.7.4.4 Call Scan
In Figure 3-85, input Scan value and then click
to call a tour. Click again to stop call.
3.7.4.5 Call Rotation
In Figure 3-85, click
to enable the camera to rotate.
System supports preset, tour, pattern, scan, rotate, light and etc function.
Note:
 Preset, tour and pattern all need the value to be the control parameters. You can define it as you
require.
 You need to refer to your camera user’s manual for Aux definition. In some cases, it can be used for
special process.
3.7.4.6 Aux