180
Note
Destination IP and port refers to NVR IP address and port. System can auto get and display.
Step 3 Click OK to complete setup.
Connection mode is RS232 or RS485.
Step 1 Click Setup.
Enter Setup interface. See Figure 3-171.
Figure 3-171
Step 2 Set address, baud rate, data bit, stop bit and parity.
Note
Make sure the parameters here are the same with the POS setup.
Step 3 Click OK to complete setup.
3.11 Network
3.11.1
Network Settings
3.11.1.1 TCP/IP
From main menu>Setting>Network>TCP/IP, the interface is shown as in Figure 3-172.
IP Version: There are two options: IPv4 and IPv6. Right now, system supports these two IP
address format and you can access via them.
Preferred DNS server: DNS server IP address.
Alternate DNS server: DNS server alternate address.
Default card: It is to set default network card.
LAN download: System can process the downloaded data first if you enable this function. The
download speed is 1.5X or 2.0X of the normal speed.
Important
To Next Page
Loading...
