Dahua NVR608-32-4KS2 - Page 310

294
Step 2 Select the channel.
Step 3 Set the parameters. For details, see the following table.
Parameter Description
Temperature
Switch
Select the check box to enable it.
Temperature
Unit
The temp unit includes ℃ and ℉.
Relative
Humidity
The relative humidity of the environment. The range is 0-100%RH.
Atmospheric
Temperature
The environment temp. The range is -50℃-+327.7℃.
Physical
Radiation
Coefficient
The range is 0.5-1.
Object Distance
The distance between the camera and the target. The range is
0m-10000m.
Object
Reflective
Temp
The target temperature. The range is -50℃-+327.7℃.
Hot Spot Follow
After enabling hot spot follow, the highest temp and lowest temp are
marked in different colors in the monitor window.
Isotherm
Select the Enable check box.
The temp shall meet the condition: Min temp ≤ medium temp ≤ max temp
≤ Saturation.
Min Temp
The range is from -40℃ to +150℃.
The value shall meet the condition: Min temp ≤ medium temp ≤ max temp
≤ Saturation.
Medium Temp
Max Temp
Saturation
Color Code
Select the Enable check box. The color bar is displayed on the right side
of the monitor window.
Step 4 Click OK to complete the setting.
After the setting, the effect is displayed as Figure 4-56, Figure 4-57 and Figure 4-58.