47
Figure 3-21
Step 2 Set parameters
Link Info: Display the access list of the Panoramic+PTZ camera.
Channel: It is the device channel number. If you have not added the network camera, the
channel number is shown as
.
Status: Red circle (
) means current channel has no video, green circle ( ) means
current channel has video.
IP address: It is to display network camera IP address.
Port: It is to display network camera port number.
Device name: It is to display network camera name.
Add/Delete: Click
to delete the device, click to add the device to the NVR.
Step 3 Add network camera.
Device search: Click the button; you can search all network cameras in the same network
segment. See Figure 3-22. Double click a camera or check the camera box and then click
Add button, you can add a device to the list.
Note
The device in the added device list is not shown in the search result column.
To Next Page
Loading...
