Dahua VTH5421 Series - VTH Settings

Device Debugging 27
Parameter
Description
First Name
Set VTH username and nickname, in order to distinguish.
Last Name
Nick Name
Room No.
Set VTH room number.
 VTH short number consists of 1～6 numbers, which may
include number and “#”. It shall be consistent with room
number configured at VTH.
 When there are master VTH and extensions, to realize
group call function, master VTH short no. shall end with
“#0”, whereas extension VTH short no. shall end with #1,
#2 and #3. For example, if master VTH is 101#0,
extensions will be 101#1, 101#2…
Register Password
Signaling interactive use in SIP system. Adopt default value.
Register Type
Table 5-4
Click “OK” to complete adding. Step 4
Repeat these steps to add other indoor stations in the group.
5.1.2 VTH Settings
5.1.2.1 Initialization
Set the password and bind your Email.
 Password: it is used to enter project setting interface.
 Email: it is used to retrieve your password when you forget it.
Power on the device. Step 1
The system displays “Welcome” and enters “Device Initialization” interface, as shown in
Figure 5-13.