Interface Operation 55
After auto capture is enabled, 3 pictures will be
captured automatically when VTO calls VTH. View
them at “Info > Record and Picture” interface.
This function is valid only when SD card is inserted.
After enabling touch ring, there will be a ring when
touching the screen.
Table 6-5
6.2.7 Product Info
Reboot the system and format SD card.
If SD card isn’t inserted into the device, SD format function is invalid.
Press [Setting]. Step 1
The system pops up “Password” prompt box.
Input login password and press [OK]. Step 2
Default login password is 123456. Please refer to “6.2.6.3 Password Setting“ for
details.
Press [Product Info]. Step 3
The system displays “Product Info” interface, as shown in Figure 6-18.
Figure 6-18
Reboot
Press [Reboot] and press [OK] at prompt interface. The device will reboot.
SD Format
Press [SD Format] and press [OK] at prompt interface. The SD card will be formatted.
To Next Page
Loading...
Need help?
General
