Dahua VTH5421 Series User Manual

Interface Operation 36
6 Interface Operation
Main Interface 6.1
There are six items at the main interface, namely, call, info, monitor, SOS, setting and arm/disarm, as
shown in Figure 6-1. For description of every item, please refer to Table 6-1.
No.
Name
Description
1
Room No.
Number of the room where VTH is located.
2
Call
Call a user.
Manage the contacts.
View and manage the call records.
3
Info
View, delete and clear notices issued by Property Management Center.
View, delete and clear security alarm info.
When VTH doesn’t have a SD card or VTO enables video-audio
message uploading function, “Guest Message” tab will be displayed.
View, delete and clear messages of VTO.
When VTH owns a SD card, “Video Pic” tab will be displayed. View,
delete and clear videos and pictures.
4
Status Bar
: Wired network connection icon, meaning that the device isn’t
connected with network.
: Wired network connection icon, meaning that the device has
connected with network in a wired way.
: Wi-Fi network connection icon, meaning that the device has
connected with network in a wireless way.
: Main VTO connection icon, meaning that the device failed to
connect main VTO; without this icon, the device has connected with
main VTO successfully.
: SD card icon, meaning that SD card has been inserted into the
device; without this icon, the SD card has not been inserted or the
device doesn’t support SD card.
: DND (Do Not Disturb) icon, meaning that the device has enabled
DND function. It is not enabled by default.
5
Time
Display date, day of the week and time.
6
Arm/disarm
Display the last unread alarm info.
: press this icon to enter arm mode selection.

Dahua VTH5421 Series Specifications

General

Brand	Dahua
Model	VTH5421 Series
Category	Intercom System
Language	English