Name: Dahua XVR5108HS
Brand: Dahua
Rating: 5 (1 reviews)

To Next Page

To Previous Page

316

Figure 4- 27

Step 10 Click Finish to complete the initialization.

4.1.4.4.2Auto Add

Step 1 Click IP Search, device displays searched results.

Step 2 Double click an IP address or select an IP address and then click Add button, it is

to register the device to the DVR. Device supports batch add.

4.1.4.4.3Manual Add

Step 1 Click Manual add to register the camera manually. There are three modes:

TCP/UDP/Auto. The default setup is TCP. See Figure 4- 28.

Step 2 Input the corresponding value and then click OK button.

Note



This series product supports the IPC from many popular manufactures such

as Sony, Hitachi, Axis, Samsung, Dynacolor, Arecont, Onvif and Dahua.



System default IP address is 192.168.0.0 if you do not input IP address.

System will not add current IP address.



You cannot add two or more devices in the Manual Add interface (Figure

4- 28.). Click OK button, system connects to the corresponding front-end

device of current channel on the interface.

 means connection successful. means connection failed.

Dahua XVR5108HS Specifications

General

Dahua XVR5108HS User Manual

Questions and Answers: