Dahua XVR5108HS User Manual

504
5.10.1 Camera
It is to add network camera, set camera properties and set encode parameters.
5.10.1.1 Remote Device (For digital channel only)
From main window->Setup->Camera->Registration, registration interface is shown as
below. See Figure 5- 22.
Figure 5- 22
5.10.1.1.1 Initialize Camera
It is to initialize connected remote device and change its login password and IP address.
Steps:
Step 1 From main interface->Setting->Camera->Registration.
Enter Registration interface. See Figure 5- 23.
Step 2 Click IP search and check the Uninitialized box.
Device displays uninitialized camera.
Figure 5- 23

Dahua XVR5108HS Specifications

General

Video Compression	H.265+/H.265/H.264+/H.264
Video Output	1 HDMI, 1 VGA
USB Interface	2 USB 2.0
Power Supply	12V DC/2A
Video Channels	8 channels
HDD Capacity	Up to 6TB
Operating Temperature	-10°C to +55°C (+14°F to +131°F)
Audio Input/Output	1/1 RCA
Internal HDD	1 SATA interface, up to 6TB
Max IP Camera Input	12 channels
Recording Resolution	1080P/720P
HDMI Output	1
VGA Output	1
Operating Humidity	10%–90% (RH), non-condensing
IP Video Input	8+4 channels