Dahua XVR5108HS User Manual

454
Figure 4- 192
4.9.4.7 HDD Detect
The HDD detect function is to detect HDD current status so that you can clearly
understand the HDD performance and replace the malfunction HDD.
There are two detect types:

Quick detect is to detect via the universal system files. System can quickly complete
the HDD scan. If you want to use this function, please make sure the HDD is in use
now. If the HDD is removed from other device, please make sure the write-data once
was full after it installed on current device.

Global detect adopts Windows mode to scan. It may take a long time and may affect
the HDD that is recording.
4.9.4.7.1Manual Detect
The manual detect interface is shown as below. See Figure 4- 193.
Please select detect type and HDD. Click start detect to begin. You can view the
corresponding detect information. See Figure 4- 194.

Dahua XVR5108HS Specifications

General

Video Compression	H.265+/H.265/H.264+/H.264
Video Output	1 HDMI, 1 VGA
USB Interface	2 USB 2.0
Power Supply	12V DC/2A
Video Channels	8 channels
HDD Capacity	Up to 6TB
Operating Temperature	-10°C to +55°C (+14°F to +131°F)
Audio Input/Output	1/1 RCA
Internal HDD	1 SATA interface, up to 6TB
Max IP Camera Input	12 channels
Recording Resolution	1080P/720P
HDMI Output	1
VGA Output	1
Operating Humidity	10%–90% (RH), non-condensing
IP Video Input	8+4 channels