Name: Dahua XVR5108HS
Brand: Dahua
Rating: 5 (1 reviews)

To Next Page

To Previous Page

507

Note



If it is to change several devices IP addresses at the same time, please input

incremental value. Device can add the fourth address of the IP address one

by one to automatically allocate the IP addresses.



If there is IP conflict when changing static IP address, device pops up IP

conflict dialogue box. If batch change IP address, device automatically skips

the conflicted IP and begin the allocation according to the incremental value

Step 8 Click Next button.

Device begins initializing camera. See Figure 5- 27.

Figure 5- 27

Step 9 Click OK to complete the initialization.

5.10.1.1.2 Auto Add

Step 1 From main interface->Setting->Camera->Registration

Step 2 Click IP Search, device displays searched results.

Step 3 Double click an IP address or select an IP address and then click Add button, it is

to register the device to the DVR. Device supports batch add.

5.10.1.1.3 Manual Add

Step 1 Click Manual add to register the camera manually. There are three modes:

TCP/UDP/Auto. The default setup is TCP. See Figure 5- 28.

Dahua XVR5108HS Specifications

General

Dahua XVR5108HS User Manual

Questions and Answers: