9
10. Centralized Control “ ”
• Displayed if the system is under the
management of centralized control
equipment (optional accessories) and the
operation of the system through the remote
controller is prohibited.
11. Changeover Under Control “ ”
(VRV only)
• Displayed if the remote controller has no
cool/heat selection eligibility. (Refer to
page18).
12. Setback “ ” (Refer to page16.)
• The setback icon blinks when the air
conditioner is turned on under the setback
control.
13. Clock (12/24hours time display)
• Displayed when the clock is set (Refer to
page60).
• If the clock is not set, “ -- : -- ” will be
displayed.
14. Selectable Display Item
• Displayed when the detailed display is
selected (Refer to page56).
• No detailed items are selected by default.
15. Timer Disabled/Reset Clock “ ”
• Displayed when the clock needs to be
reset.
• The schedule timer function will not work
unless the clock is reset.