Si01-501 Instructions
System Configuration 65
2.2.5 POWERFUL Operation
14
POWERFUL Operation
POWERFUL operation quickly maximizes the cooling effect in
any operation mode. You can get the maximum capacity .
To start POWERFUL
operation
1. Press “POWERFUL button”.
•
POWERFUL operation ends in 20 minutes. Then
the system automatically operates again with the
settings which were used before POWERFUL
operation.
• When using POWERFUL operation, there
are some functions which are not available.
•
“” is displayed on the LCD.
To cancel POWERFUL
operation
2. Press “POWERFUL button” again.
• “” disappears from the LCD.
NOTE
Notes on POWERFUL operation
• POWERFUL Operation can only be set when the unit is running. Pressing the operation
stop button causes the settings to be canceled, and the
“ disappears from the LCD.
• In COOL mode
The air flow rate is fixed to the maximum setting.
The temperature and air flow settings are not variable.
• In DRY mode
The temperature setting is lowered by 2.5˚C and the air flow rate is slightly increased.
• In FAN mode
The air flow rate is fixed to the maximum setting.
TEMP
ON/OFF
POWERFUL
MODE
FAN
SWING
SILENT
SENSOR
ECONO
MOLD PROOF
TIMER
ON
CANCEL
OFF
C
ON
1, 2
”
To Next Page
Loading...
