For BPMK928B42 · 43 Si18-201
312 Removal Procedure
1. For BPMK928B42 · 43
1.1 Installation of Indoor Unit
Procedure Warning Be sure to turn off all power supplies before disassembling work.
Step Procedure Points
1. For ceiling mounting
"
This unit is of drain-free type.
"
When attaching the electrical
box, be sure to seal up the
original screw holes (using
aluminium tape or the like.)
1
Screw down the
accompanying four
fixtures in position.
2. For wall mounting
1
Screw down the
accompanying three
fixtures in position.
3. Attaching the electrical
box
1
The electrical box can
be attached on either
side of the unit
depending on the
piping route.
To Next Page
Loading...
Need help?
General