Si18-201 Main Functions
Main Functions 85
1.1.7 ON/OFF Button on Indoor Unit
For FTK, FTX50/
60 H Series Only
An ON/OFF switch is provided on the front panel of the unit. Use this switch when the remote
controller is missing or if its battery has run out.
Every press of the switch changes from Operation to Stop or from Stop to Operation
"
Push this button once to start operation. Push once again to stop it.
"
This button is useful when the remote controller is missing.
"
The operation mode refers to the following table.
"
In the case of multi system operation, there are times when the unit does not activate with
this button.
1.1.8 Signal Receiving Sign
When the indoor unit receives a signal from the remote controller, the unit emits a signal
receiving sound.
1.1.9 Air Purifying Filter
For FTK(X)25/35 J,
FTK(X)50/60 H
Series
The air purifying filter (electrostatic filter) catches pollen or smoke of cigarette as small as 0.01
micron through electro static charging. An activated carbon deodorizing filter in a net shape is
also mounted to absorb and minimize fine odor particles.
1.1.10 Washable Grille
Washable grille is for FTK(X)25/35 J, FTK(X)50/60 H Series only
In the Case of FTK,
FTX50/60 H Series
Note: Refer to P97 in Si12-001 for FTK25/35 J Series “Cleaning the air filters.”
Open the Front
Grille.
"
Hold the grille by the tabs on the two sides and lift it until it stops with a click.
Remove the Front
Grille.
"
Supporting the front grille with one hand, release the lock by sliding down the knob with the
other hand.
"
To remove the front grille, pull it toward yourself with both hands.
Mode Temperature setting Air flow rate
FTK COOL 22ºCAUTO
FTX AUTO 25ºCAUTO
To Next Page
Loading...
Need help?
General