General Functionality ESIE02–01
2–22 Part 2 – Functional Description
3
1
2
4
5
1.16 Auto-Restart Function
Applicable units All units
Purpose The purpose of the auto-restart function is to resume the same operating mode after the power was
turned OFF as when the unit was operating.
Turning OFF power When you have to turn OFF the power supply in order to carry out maintenance, make sure to turn the
remote control’s ON/OFF switch OFF firstly.
If you turn OFF the power supply while the remote control’s ON/OFF switch is still ON, the “auto-restart
function” automatically starts the indoor fan immediately or the outdoor unit fan starts automatically
3 min after the power supply is turned back ON.
To Next Page
Loading...
