Daikin Sky Air R-407C - Checking with the Infrared Remote Control Display

ESIE02–01 Troubleshooting
Part 3 – Troubleshooting 3–7
33
4
5
1
1.4 Checking with the Infrared Remote Control Display
Introduction Contrary to the wired remote control, the infrared remote control does not display the error code.
Instead, the operation LED on the light reception section flashes.
Checking To find the error code, proceed as follows:
Step Action
1 Press the INSPECTION/TEST button to select “inspection”. The equipment enters the
inspection mode. “0” flashes in the UNIT No. display.
00
0
CODE
UP
FAN
RESERVE
CANCEL
TIMER
DOWN
TEMP
TIME
ON / OFF
MODE
SWING
/TEST
UNIT No.
INSPECTION/TEST